Slide Mounting Media
Electron Microscopy Sciences Citifluor™ Mountant Solution CFM-1, Glycerol Based, Non Hardening 10 ML
Citifluor mounting medium for immunofluorescence is designed to reduce the fading of the fluorescence of dyes used for labeling biological specimens. In the technique of fluorescence microscopy, the fluorescence is stimulated by high intensity UV and/or visible light. Absorption of the light populates an excited state of the dye (usually a singlet state) and this leads to fluorescence. However, the excited state of the dye may undergo chemical reaction, which leads to destruction as evidenced by the fading of the fluorescence and consequent loss of the image. Glycerol-PBS buffered solution with a refractive index of ~1.52. For TEM or epi-fluorescence.
Material: Glycerol Based
Type: Non Hardening
AdipoGen DAPI 2HCl Solution 10mM water
Chemical. CAS 28718-90-3. Formula C16H15N5 . 2HCl. MW 350.25. DAPI 4,6-Diamidino-2-phenylindole dihydrochloride is a cell permeable, fluorescent dye that is a minor groove-binding probe for DNA. Binds to the minor groove of double-stranded DNA preferentially to AT rich DNA, forming a stable complex which fluoresces approximately 20 times greater than DAPI alone. DAPI is several times more sensitive than ethidium bromide for staining DNA in agarose gels. It may be used for photofootprinting of DNA, to detect annealed probes in blotting applications by specifically visualizing the double-stranded complex, and to study the changes in DNA and analyze DNA content during apoptosis using flow cytometry. DAPI staining has also been shown to be a sensitive and specific detection method for mycoplasma. Spectral Data Excitation lambdaex 340 nm Emission lambdaem 488 nm only DAPI. Excitation lambdaex 360nm Emission lambdaem 460nm DAPI-DNA complex.
Ibidi USA Mounting Medium, 15 ml
ibidi Mounting Medium is a glycerol-based, non-hardening mounting medium optimized for fluorescence microscopy. The dropper bottle is ideal for exact dispensing into channels or open wells such as in the ibidi µ-Slides and µ-Dishes. 15 ml
Electron Microscopy Sciences EMS Silver Conductive Adhesive 478ss 15 GR
Our adhesive 478SS is a conductive, silver-based polymer which is used for thick film coatings where liquid silver is not an option. Once cured, it offers a very high Tg (glass transition temperature) 153 degree F (67 degree C) to prevent blocking, and offers superior adhesion to polyester film. Adhesive 478SS can be cured at 200 degree F (93 degree C) within 15 minutes. Higher temperatures will reduce the time needed to achieve a final cure.
Electron Microscopy Sciences LR White Resin, Medium, Uncatalyzed 500 ML
A very low viscosity (8cps), non-toxic resin, suitable for both Light and Electron Microscopy. LR White is a polar monomer polyhydroxylated acromatic acrylic resin. It can be cured by heat or by UV light. Sections of polymerized LR White resin are hydrophilic. This character allows immuno-cytochemistry reagents to easily penetrate into the sections and etching of the sections is not necessary (etching sections will effect delicate tissue antigens). LR White sections also show minimal non-specific staining. Its low viscosity makes it ideal for infiltrating decalcified bone and teeth as well as plant tissues.
Electron Microscopy Sciences LR White Resin, Hard, Uncatalyzed 500 ML
A very low viscosity (8cps), non-toxic resin, suitable for both Light and Electron Microscopy. LR White is a polar monomer polyhydroxylated acromatic acrylic resin. It can be cured by heat or by UV light. Sections of polymerized LR White resin are hydrophilic. This character allows immuno-cytochemistry reagents to easily penetrate into the sections and etching of the sections is not necessary (etching sections will effect delicate tissue antigens). LR White sections also show minimal non-specific staining. Its low viscosity makes it ideal for infiltrating decalcified bone and teeth as well as plant tissues.
Electron Microscopy Sciences Entellan Rapid Mounting Media 500 ML
Entellan is a rapid mounting media for microscopy. It can be used for long life preparations, without bubble formation at high ambient temperatures. Also for all dehydrated microscopic preparations. Cure time is 20 minutes at room temperature. It is colorless with an acid number less than 2.50 and a R.I. ND20 approx 1.49-1.5. (Contains xylene).
Electron Microscopy Sciences EMbed 812, 450ml
EMbed 812 has the same characteristics as Epon 812, physically, and provides the same results in preservation, handling, curing and sectioning. EMbed 812 may cause etching on selected plastics. All formulas for mixing and using Epon 812 can be applied to EMbed 812
Newcomer Supply Mount-Quick Aqueous Mounting Media, 30cc
Newcomer Supply Mount-Quick Aqueous is a ready-to-use liquid mounting medium for histological techniques requiring an aqueous based mounting medium solution and/or when dehydrating and clearing agents will adversely affect the stain, such as: lipid/fat stains, crystal violet stains and solvent soluble immunoperoxidase chromogenic procedures. Mount-Quick Aqueous mounting medium is not recommended for use in immunofluorescence procedures.
Leica Biosystems CV MOUNT
The CV Mount is suitable for all common robotic coverslippers as well as for manual coverslipping procedures.
Newcomer Supply PERMANENT MOUNTNG MEDIUM 125ML
Permanent Mounting medium preserves AEC DAB Fast Red and other dye chemistry stains. 125mlSets in 5 minutes at Room Temperature. Manufactured by Innovex Biosciences.
Andwin Scientific Aqua-Mount Mounting Medium, M800 20ml
Aqua-Mount Mounting Medium is a non-fluorescing, aqueous formula that is made to be utilized for immunostaining. It is sold in a quantity of 20 mL.